Sonic Art LEGEND vacuum tube amplifier | Single ended EL84

"The LEGEND SE” Vacuum tube amplifier

The LEGEND SE is a classic Single Ended tube amplifier which utilises one of the all time great power tubes, the EL84.

I have always had a fondness for this tube, and wanted this amplifier to carry on where the old LEGEND (using ECL86 tubes) left off. Using the EL84 allows the Audiophile the ability to tube roll to their hearts desire. Being such a simple amplifier with a direct path to the output transformers, different tubes are easily distinguishable from each other sonically.

The LEGEND SE is a classic Single Ended tube amplifier using one of the all time greats, the EL84 pentode power tube. Input drives through a Class A dual triode 12AT7/AY7 allowing a very simple coupling path with minimal capacitance. Pentode or Triode connection is easily configured inside the amplifier.

AxON Tin Foil caps and kiwame resistors are used in the signal path, Power supply are Japanese High Voltage electrolytics. Sonic Art Silver signal cable is used for the input and an ALPS BLUE VELVET volume pot is standard. Output transformers are hand wound with multiple section windings, a precision air gap and very tight tolerances. Results are extended bandwidth at full power output. PCB is high quality fibreglass with silver plated tracks.

Chassis is brushed anodised non magnetic all alloy with CNC front plate and volume knob. Power input features IEC EMI/RFI filtering module and AC cap for smooth turn-on. Speakers around 88dB upwards are suitable for the LEGEND, 4 & 8 ohm output taps are offered to match most domestic loudspeakers. Sound quality? Simply amazing!

An upgrade pack is available for the LEGEND with the following suggested components:

NOS USA GE/Sylvania EL84 power tubes

NOS GE 6072 / 12AT7 input tube

ULTRA FAST soft recovery diodes.

CARDAS Golden section Film coupling caps.

CARDAS Silver Rhodium plated copper binding posts.

CARDAS Silver Rhodium plated copper RCA sockets.

Power output:

Response:

Operating voltage:

Fuse:

Dimensions:

Weight:

2.5wpc RMS / 5wpc peak Pentode / 1.2wpc RMS 2.5wpc peak Triode

18Hz – 42kHz @ RMS power

220-240VAC (110-120V can be specified for overseas customers)

500ma

W260mm H105mm D330mm

7.0 kilos

The LEGEND is hand built in Australia. Our chassis and major components are manufactured to spec for us in Asia (not china!). Amplifiers are supplied in kit form (just a matter of bolting in boards and some simple solder connections) and delivery is usually within 3-5 days depending on stock availability. Assembly service is available free during the introduction period. Purchases through direct mail order from Sonic Art. Will be available fully assembled for Dealers once Australian certification is complete.

"The LEGEND SE” - AUD$899.00

Special Edition upgrade pack – AUD$330.00

Local and Overseas Dealer inquiries welcome