
'Time Aligned' Silver Audio
Cables
"Providing
SYNERGY to your Audio System"
|
SILVER
REFERENCE series Interconnect
& Speaker cables Featuring triple 'Time Aligned' conductors. The new SILVER REFERENCE!
• SILVER Reference
RCA
is a culmination of our cable technology advancement and has been designed to
exhibit a broad frequency response whilst maintaining a full bodied liquid
soundstage. A very low noise floor creates an incredible holographic image. • SILVER Reference
RCA
features our optimum conductor sizing in our 4N Silver & Copper MILSPEC configuration, individual hot and
cold runs maintain signal separation. Triple 'Time Aligned' core construction
is covered by our Silver Alloy shield and then insulated in our Pressure cast
Teflon and Antistatic Polyester sheathing. Terminated with CARDAS Copper
alloy, Silver plated plugs, these high end plugs finish off this incredible
new cable. • SILVER Reference
RCA
is assembled by hand, and like all our cables each pair comes from the same
cable batch and run. The antistatic sheath is laid over and heat shrunk in
place, the wire is then soldered directly to the Silver plated plugs with our
Mil Spec Silver solder. The plugs are sealed and then labelled for direction.
Each pair is tested and run before packing ready for shipment. SILVER REFERENCE
XLR
• SILVER Reference
XLR features
our optimum conductor sizing in our 4N
Silver & Copper MILSPEC configuration, individual hot and cold runs
maintain signal separation. Triple 'Time Aligned' core construction is
covered by our Silver Alloy shield and then insulated in our Pressure cast
Teflon and Antistatic Polyester sheathing. Our second shield is utilised in
the XLR configuration and cables are terminated with Neutrik’s top XLR plug
featuring gold plated beryllium copper contacts, these high end plugs finish
off this incredible new cable. |
SILVER Reference Interconnect Specifications:
|
Wire: MILSPEC 4N Silver/Copper.
Perfectly round conductors. Time Aligned triple core design. Separate Hot and
Cold runs. Floating shield. |
|
Insulation: MILSPEC pressure cast Teflon with
MILSPEC Silver Braided shield. MILSPEC pressure cast Teflon outer jacket with
Polyester Antistatic outer mesh sheath. |
|
Termination: CARDAS Copper alloy Silver plated
RCA or Neutrik XLR plugs finished with
the correct MILSPEC Silver Solder. |
|
Note: Sonic Art SILVER Reference must
be run in the direction of the lettering |
|
Sonic Art Cables require 100+ hours of use before reaching
full performance. |
|
Our
latest Digital cable has replaced every other RCA digital we have; it’s
called the BLUE
LIGHTNING • BLUE LIGHTNING is a culmination of Digital
technology advancement and has been designed for the most stringent of
digital signal transfers. Featuring optimum digital conductor sizing in our
proven MILSPEC configuration this cable is a true 75ohm cable and performance
in the digital realm is unsurpassed at the price. Check out our feedback
page, we had a customer compare the Blue Lightning favourably against a CHORD
Company Digital cable which costs more than 4 times the Blue Lightning. • BLUE
LIGHTNING features our 4N Silver Alloy metallurgy with Pressure cast Teflon dielectric,
and a full silver shield. Teflon outer jacket is further suppressed by the
use of a MILSPEC Antistatic Polyester mesh sheath. The result is smoothness
above our standard Silver digital cable, with more detail, blacker, quieter
background, and an ‘organically live’ sound. |
BLUE LIGHTNING DIGITAL
Interconnect Specifications:
|
Wire: MILSPEC factory construction of
Silver & Copper 0.65mm diameter. Perfectly round conductors. True 75-ohm
performance. Floating shield. |
|
Insulation: MILSPEC pressure cast Teflon with
MILSPEC Silver Braided shield. MILSPEC pressure cast Teflon outer jacket with
Polyester Antistatic outer mesh sheath. |
|
Termination: Sonic Art RCA plugs featuring 24K
gold contacts and silver plated machine brass alloy body with the correct
MILSPEC Silver Solder. |
|
Note: All Sonic Art Cables must be run
in the direction of the arrows. |
|
Sonic Art Cables require 100+
hours of use before reaching full performance. |
|
EBONY
Vario-strand speaker cable • EBONY
is the advancement of our original 8 core Speaker cable and builds on the
excellent performance and value we offer. Featuring Variostrand technology,
like many high-end cable manufacturers we combine various diameter conductors
to create a cable that can better reproduce both ends of the audio bandwidth.
• EBONY
features 1.2mm-centre conductors surrounded by our 0.8mm outer conductors,
all in our 4N metallurgy with
pressure cast Teflon dielectric. Shielding the conductors is a MILSPEC Silver
Mylar foil shield incorporating a drain wire, which can be utilised actively
when an amplifier earthing post is present to further reduce the noise floor
through the cabling. Our speaker
cables are unique in that they have shielding built into the design, which
helps to reduce RFI and EMI interference where the cable is sitting near
other signal, and power cables, Protecting the delicate
construction is a heavy Military PVC outer sheath, which gives the cable
strength, flexibility and has a softer resonance than Teflon. It also allows
us to print efficiently on the outside, aiding in identification and
direction. *Some
might ask why we have chosen to eliminate our trademark Teflon outer sheath
on the new speaker cable; it was not a price compromise, as our customers know
our dedication to material quality. With the MILSPEC Mylar foil shield over
the conductors the need for Teflon on the outside is removed, and the need
for flexibility can be addressed directly. We can also print on the cable,
which is an added bonus for correct direction and identification. The
resonance characteristics of Military PVC is also well suited to the cable
but we cannot go into that too much J |
EBONY Speaker cable
Specifications:
|
Wire: MILSPEC construction of MILSPEC
Silver/Copper 0.8mm & 1.2mm diameter cores. Perfectly round multi strand
conductors, 8 core design. |
|
Insulation: MILSPEC pressure cast Teflon on
all conductors. MILSPEC Silver Mylar foil shield with drain wire. Black
military PVC outer jacket. |
|
Note: All Sonic Art Speaker Cables must
be run in the direction of the print. |
|
Sonic Art Cables require 100+ hours of use before reaching
full performance. |
Click HERE to go to the main cable specifications and
pricing
Hand made in Australia ©1992 -
2008 Sonic Art AUSTRALIA.
Sonic Art reserves the right
to change specifications due to ongoing research.