SONIC ART GROUNDING CABLE 1.5m "SPADE & RCA"

READ ABOUT SONIC ART CABLE DESIGN & ENGINEERING HERE

SILVER LINE “THE GROUND”

Sonic Art Ground cables are made from our Silver Line series conductors, the Ground cable uses a heavy version of our silver copper alloy conductors, insulated in pressure cast Teflon like all our conductors. We then add a heavy woven PE antistatic sheath to protect and damped the wire. Sonic Art SilverLine RCA plug is fitted to one end and our SILVER SPADE is fitted to the other end. Our spades are a custom made alloy spade with straight copper then silver plating, we secure the ground wire with screws first then silver solder fill in the outer section of the wire bore to ensure years of trouble free operation. Adhesive heatshrink is used at both ends to keep the ground wire firmly assembled.

• Why choose Silver? Because it offers excellent conductivity, and if the metallurgy is correct, a sweet and detailed sound.

• Why Silver & Copper? Pure Silver is soft, it requires impure metals for strength and usually sounds bright and thin when combined with the most common hardeners. Combine it with Hi purity copper and you have the best of both worlds.

• Why choose TEFLON? Dielectric quality is an important factor when designing cable. The lowest loss insulator available is VIRGIN PTFE (Pressure Cast TEFLON), Teflon  unfortunately is also the most expensive, which you could surmise is why many manufacturers avoid using it. Our TEFLON is the highest MILSPEC grade available and exhibits the lowest signal loss of any insulator besides air.

• CARDAS TRI-Eutectic Silver Solder is used to seal the screw connection in our Silver plated Spades. If you attempt to solder silver with normal solders you get absorption of silver particles causing poor joint performance and degradation of signal. Silver solder is designed to suppress silver absorption from the surface of the silver wire leaving a joint that is pure and provides the best conductivity from solder possible.

NOTE: Where we use PE sheathing over our cables, it is purely for Anti Static properties and in no way is a structural part of the cable.

Have you ever noticed how other HI-END cable manufacturer’s have a range of much cheaper models, all slotted in under their most expensive ‘Flagship” cable?  We on the other hand produce one model of RCA and Speaker Cable, and one Reference Range, both with Hi-Tech engineering and materials. We keep our marketing and advertising costs low, allowing us to price our cables way below our competitors Flag Ship models, yet compete with them performance wise.

All Sonic Art cables are hand assembled in Melbourne AUSTRALIA to exacting standards.

SILVER LINE “THE GROUND” Specifications:

Wire: MILSPEC 4N Silver/Copper 1.4mm diameter. Perfectly round conductor & strand grouping for even dielectric wall thickness.

Insulation: Military Grade VIRGIN PTFE (Pressure cast Teflon).

Termination: Sonic Art SIlverLine RCA plug & Sonic Art Alloy Silver plated Spade.

Sonic Art Cables require 150+ hours of use before reaching full performance.