CATEGORIES
- SONIC ART CABLE RANGE->
- SONIC ART "ITSaRACKIT" SHELVING
- REGA TONEARMS & UPGRADES->
- TONEARM UPGRADES, PLUGS, WIRING->
- TURNTABLE ACCESORIES->
- ORIGIN LIVE UK->
- ORACLE AUDIO CANADA->
- AUDIO TECHNICA TURNTABLES
- PHONO CARTRIDGES->
- CEC AUDIO JAPAN->
- AUDIOLAB UK->
- PRO-JECT AUDIO->
- SONIC ART POWER SUPPLIES
- SONIC ART FABRICATION SERVICES->
- AUDIOPHILE VINYL & CD's->
- VACUUM TUBES->
- REPLACEMENT REMOTE HANDSETS!
- DIY AUDIO COMPONENTS->
- CLEARANCE, DEMOS, TRADE-INS!
- Specials ...
REVIEWS & TECHNOLOGY
AT-OC9XEB CARTRIDGE -
AUDIO TECHNICA
The AT-OC9XEB Dual Moving
Coil cartridge with bonded elliptical stylus is designed to provide outstanding
channel separation. The Pure Copper by Ohno
Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned
in a reverse V-shaped formation to exert less pressure on the stylus, thereby
minimising distortion. Audio quality is further enhanced by a rigid aluminium
body that reduces resonance, a neodymium magnet and pure iron yoke that
increase the magnetic energy, and the bonded elliptical stylus on an aluminium
cantilever that accurately tracks the record groove. The cartridge body has
been pre-threaded, enabling it to be mounted to a headshell
or integral tonearm with just two screws – no nuts required.
Frequency
Response 20 - 30,000 Hz
Channel Separation 25 dB (1 kHz)
Vertical Tracking Angle 20°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Stylus Construction Bonded round Shank
Recommended Load Impedance Min 100 Ω
Coil Impedance 12 Ω
DC resistance 12
Ω
Coil inductance
25uH (1khz)
Output Voltage 0.32
mV (@ 1 kHz, 5 cm/sec)
Output Channel Balance 1.5 dB (1 kHz)
Stylus Shape Elliptical bonded
Cantilever Aluminum pipe
Static Compliance 20 x 10–6 cm / dyne
Dynamic Compliance 9 x 10–6 cm / dyne (100 Hz)
Mounting 1/2” centres
Cartridge Weight 7.6g
Dimensions 17.3 x 16.8 x 25.7mm
Stylus size 0.3 x
0.7mil
Coil wire: PCOCC
(Copper by Ohno Continuous Casting process.)
Accessories Included Two 11 mm
installation screws, Two 8 mm installation screws, Two
washers, Non-magnetic screwdriver.